153+ Wooden Storage Bench With Backrest

www.vecteezy.com

```html

Introduction: Building a Rustic Wooden Storage Bench with Backrest This project will guide you through creating a sturdy and attractive wooden storage bench, perfect for entryways, mudrooms, or patios. Not only does it offer comfortable seating, but it also provides ample storage space for shoes, blankets, or outdoor gear. This DIY project requires some basic woodworking skills and tools.

Materials and Tools

Wood (Pine, Cedar, or Redwood recommended):

• Two (2) 2x4s at 8 feet long for frame
• Two (2) 1x4s at 8 feet long for trim
• One (1) 4x8 sheet of 3/4" plywood for bench seat and sides
• One (1) 1x6 at 8 feet long for bench backrest

Wood screws (assorted sizes, 1 1/4", 2", 2 1/2")

Wood glue

Sandpaper (80, 120, and 220 grit)

Wood stain or paint (and sealant)

Hinges (2 or 3, depending on bench size)

Safety glasses

Hearing protection

Dust mask

Measuring tape

Pencil

Saw (Circular saw or miter saw)

Drill/Driver

Screwdriver

Clamps

Optional: Pocket hole jig

Step 1: Planning and Cutting the Wood Begin by sketching out your bench design and determining the desired dimensions. A common size is around 48 inches wide, 18 inches deep, and 36 inches tall (including the backrest). Based on these dimensions, cut the lumber to the following sizes:

Legs (2x4s): Cut four pieces to your desired height (e.g., 16 inches).

Frame (2x4s): Cut two pieces to the width of your bench (e.g., 48 inches) and two pieces to the depth of your bench (e.g., 18 inches).

Bench Sides (Plywood): Cut two pieces to the desired height and depth (e.g. 16 inches x 18 inches).

Bench Front and Back (Plywood): Cut two pieces to the desired height and width (e.g. 16 inches x 48 inches).

Bench Seat (Plywood): Cut one piece to the desired width and depth (e.g., 48 inches x 18 inches).

Backrest Support (2x4): Cut two pieces to the desired height of the backrest (e.g., 20 inches)

Backrest Top (1x6): Cut one piece to the width of the bench (e.g., 48 inches)

Trim (1x4s): Cut enough to trim the top edge of bench (width and depth)

Precise measurements and accurate cuts are crucial for a well-constructed bench.

Step 2: Assembling the Bench Frame Using wood glue and screws, assemble the 2x4 frame. Attach the legs to the inside corners of the frame, creating a rectangular base. Ensure the corners are square. Clamps can be useful during this process to hold the pieces in place while the glue dries and the screws are driven in. Pocket holes on the inside of the legs/frame will add strength.

Step 3: Attaching the Bench Sides, Front, and Back Attach the plywood sides, front, and back to the 2x4 frame using wood glue and screws. Make sure to pre-drill pilot holes to prevent the wood from splitting. Ensure the plywood is flush with the top edge of the frame.

Step 4: Creating the Hinged Seat Attach the bench seat to the frame with hinges. Position the hinges along the back edge of the bench seat, allowing the seat to lift up for access to the storage compartment. Use screws appropriate for the thickness of the plywood and the hinge type.

Step 5: Building the Backrest Attach the two backrest support pieces (2x4s) to the inside back of the bench, extending upwards to the desired backrest height, using wood glue and screws. These can be attached to the 2x4 frame and plywood backing. Then attach the 1x6 top backrest support piece to the top of the two vertical 2x4 backrest supports, using wood glue and screws.

Step 6: Adding Trim and Finishing Touches Add trim to the top edge of the bench with 1x4 pieces, mitering the corners for a cleaner look. Sand the entire bench smooth, starting with 80 grit, then 120 grit, and finally 220 grit sandpaper. This will prepare the wood for staining or painting. Apply your chosen stain or paint and allow it to dry completely. Finally, apply a sealant to protect the finish and the wood.

Conclusion You've now successfully built your own wooden storage bench with a backrest! This sturdy and functional piece of furniture will add character and storage to any space. Feel free to customize the design and finish to suit your personal style. Enjoy your creation!

```

Free 21+ Wooden Backgrounds In Psd

www.freecreatives.com

Brown Wooden Parquet Flooring · Free Stock Photo

www.pexels.com

Diverse Wooden Surface. The Walls Of The Houses Are Made Of Wood. Boards For Background And

www.vecteezy.com "

Related Posts by Categories