Indexing jig featherboards are a great way to hold a workpiece firmly against a fence or table surface. but there's more to a featherboard than just sawing kerfs in the end of a board. the problem is cutting evenly-spaced kerfs so the fingers flex just the right amount. with the indexing jig shown below, cutting the kerfs is easy and accurate.. Featherboards are a great way to hold a workpiece firmly against a fence or table surface. but there is more to a featherboard than just sawing kerfs in the end of a board. the problem is cutting evenly-spaced kerfs so the fingers flex just the right amount. with the indexing jig shown, cutting the kerfs is easy and accurate.. Following are free plans and instruction for an assortment of woodworking jigs and templates. selection of manufactured woodworking jigs. plans 1 - 8 plans 9 - 16 plans 17 - 24. plans 25 - 32 plans 33 - 40 plans 41 - 42. free plans - jig for box joints. free plans - clamping block..
When making a index jig, drilling more index points than needed will take a little more time but can save tons of time down the road, that why the 36 point indexer was made but will not let me make 5 point rims but works great for 6 point rims i will need for the semi later on. this 5 point jig is just for the how2. ok back to work!!!. This is an easy way to make these indexing discs for the jigs i have posted. oh by the way mine ended up to be 3 and 3/8 inch. not reason, didn’t measure when i was making them. if i had measured i think i would have made them 3 inches.. Adapters can be supplied to fit any collar size up to 65mm max. the makita rt0700cx4/2 710w router trimmer has a 65mm body and will fit the jig, it also has the advantage of taking the 1/4 and 3/8 shank cutters as with the trend t4 pistol drills with a collar size of 43mm can now be fitted to the jig for drilling operations..
0 komentar:
Posting Komentar
Catatan: Hanya anggota dari blog ini yang dapat mengirim komentar.